Work as Planned, Work as Done: Closing the Gap Before It Hurts Someone

Every procedure, SWMS and risk assessment describes a job as somebody imagined it: the right tools on hand, the right number of people, plenty of time, plant in good order and nothing unexpected. That is work as planned.
The crew does the job as it really is: the part that has not arrived, the access that is tighter than the drawing shows, the client who wants it finished by lunch, the gauge that has never worked. That is work as done.
The two are never exactly the same. The difference between them is one of the most useful things a business can learn about, and one of the most dangerous to ignore.
The gap is normal
When an investigation finds that a worker "did not follow the procedure", it is tempting to stop there. But in most workplaces, people adapt the plan every day, and most of the time those adaptations are what get the job done safely. Experienced workers fill the gaps the procedure did not foresee.
The problem is not that the gap exists. The problem is when nobody above the crew knows it is there. Then:
- the procedure says a control is in place when it is not
- the risk assessment describes a job that nobody actually does
- the shortcut that worked a hundred times becomes the normal way, until the day it does not
- managers make decisions about staffing, timing and equipment based on a version of the work that does not exist
Many serious incidents are not caused by one person doing something unusual. They are caused by a gap that had been there for months, that everyone on the floor knew about, and that the system never heard about.
Why the gap opens
The gap usually has ordinary causes:
- The procedure was written away from the work. It was copied from another site, written by someone who has not done the task, or never tested on the job.
- Things have changed. New plant, a new product, a new layout or fewer people, and the procedure was not updated.
- The tools and conditions do not match. The procedure assumes equipment, access or time that the crew does not have.
- Pressure. Production targets, tight schedules or a client waiting can make the written way feel impossible.
- It does not work as written. Sometimes the step in the procedure is simply wrong, and the crew found a better way.
- Nobody asks. Workers have learned that raising a problem with the procedure leads to blame, delay or nothing at all.
Rule-breaking and the gap are not the same thing
It matters how you respond. If every gap is treated as a breach, people stop telling you about them, and the gap goes underground. If no gap is ever questioned, unsafe shortcuts become normal.
A useful way to sort it out is to ask:
- Did the person know the procedure, and could they actually follow it with the time, tools and people they had?
- Do other experienced workers do the job the same way? If most of the crew would have done the same, the problem is the system, not the individual.
- Was the adaptation safer, the same, or riskier than the written way?
Where the written way does not work, fix the procedure, the equipment or the planning. Where someone knowingly took a dangerous shortcut that others would not take, that is a different conversation.
How to find the gap
You will not find work as done by reading procedures, checking forms or looking at incident statistics. You have to go and look, and you have to ask in a way that people will answer honestly.
Go and watch the work
Pick a task that matters, ideally one with a critical risk, and watch it from start to finish with the procedure in your hand. Do not stop the job to correct small things (unless something is unsafe, in which case stop it). Note where the work and the document differ.
Ask good questions
The best questions are curious, not checking:
- "Walk me through how this job really goes."
- "What makes this job harder than it should be?"
- "Where does the procedure not match what you actually do?"
- "If you were writing this procedure, what would you change?"
- "What do new people get wrong on this job?"
- "When was the last time this nearly went wrong?"
Then listen, thank them, and do not argue.
Look at the edges
The gap is widest where conditions are unusual: night shift, weekends, breakdowns, start-ups and shutdowns, wet weather, short-staffed days and work done by contractors. Look there, not just at the job on a quiet Tuesday morning.
Bring the crew together
For a job with a known gap, sit down with the people who do it, ideally before an incident, and work through it step by step. What does the procedure say? What really happens? Why? What would make the safe way the easy way? People call this a learning team. Whatever you call it, it takes an hour and usually tells you more than a year of audits.
How to close the gap
Finding the gap is only useful if something changes. Close it from both sides:
- Change the plan to match reality, where the crew's way is as safe or safer. Rewrite the procedure with the people who do the job, and test it on the job.
- Change the work to match the plan, where the written way is right but the conditions make it hard. Fix the equipment, the access, the staffing, the timing or the pressure, not just the worker.
- Make the critical controls non-negotiable. For the controls that stop a fatality, such as isolation, edge protection, exclusion zones and gas testing, the gap must be zero. Verify them in the field, regularly, and act on what you find.
- Close the loop. Tell the crew what changed because of what they told you. Nothing kills honest reporting faster than silence.
The supervisor's role
Supervisors sit right on the gap. They see the work as done every day, and they are the people most likely to know where the procedure and reality part ways. But they are also under pressure to get the job finished.
Supervisors need permission to say "this procedure does not work", the time to go and look at the work, and a manager who wants to hear about the gap rather than being told everything is fine. Building that is a leadership job.
Training and documents
Our online course Frontline Supervisor: Leading Work Safely covers checking controls in the field, pre-starts and handovers that hold up, and investigating without stopping at the person. For managers, Risk-Based Leadership™ Module 2: Operational Decision-Making, Supervision and High-Performing Teams goes further into how leaders' decisions shape the work on the ground.
Our documents are written to help you close the gap, not just record it:
- Work as Done Review Kit: a task observation guide and record, a question card for honest conversations, a guide for sorting the gaps you find, a procedure gap register, a procedure rewrite checklist, and a guide for running a learning team session
- Work as Planned, Work as Done Awareness: a ready-to-run 20 to 30 minute toolbox talk that gets your crew talking about where the procedures and the job part ways
- Safe Work Instruction templates and Field Verification Checklists for plant and high-risk tasks, such as the Forklift Safe Work Instruction and Forklift Field Verification Checklist: write the job down as it should be done, then check it in the field
- Critical Control Verification Library: bowties and field verification forms for the controls that must never have a gap
- JSA and Take 5 Form for planning the job with the people doing it
- Incident Report and Investigation Form that looks past the person to the conditions
If you would like help finding the gaps in your critical tasks, or running a session with your supervisors, contact us.
Critical Control ManagementSupervisionRisk Management ArticlesWorkplace Health and Safety
